iPhone 14 Pro

Pour fonctionner le Face ID, veuillez utiliser votre nappa caméra originale.

10D Pleine Courbe En Verre Trempé Film Pour iPhone X/XS/11 Pro/XR/11/XS Max/11 Pro Max/12 mini/12 Pro/12 Pro Max / 13 mini / 13 Pro/13 Pro Max/14 Plus / 14 Pro/14 Pro Max 
EAN:8011655904676

Anti-Smudge
Anti-Breakage
Ultra Durable: 9H
Easy to Apply (Bubble-Free)
HD Screen

EAN: 6169957565407
This product is packaged in packs of 50 pieces. Therefore, the minimum quantity for this product is set at 50 units.

Complete iPhone 14 Pro screw kit
EAN:6938607822654

Le programmeur de restauration A108 BOX vous permet de lire et d'écrire des informations sur la batterie de l'iphone, l'id de visage et d'autres données. La carte de détection de la batterie et la carte de détection du projecteur dot sont compatibles avec notre programmeur de réparation de téléphone.

Remarque: programmeur A108 pour iPhone X-12 Pro Max Face ID reapir sans souder les câbles flexibles, il suffit de remplacer directement le câble flexible matriciel.

Caractéristiques:

1. Les données de batterie de soutien lisent et écrivent, et la correction d'identification de visage.

2. La fonction de l'appareil peut être étendue via le firmware gratuit en ligne.

3. Réparer les données sous-jacentes, les informations sur les accessoires ne seront pas déformées.

4. Sauvegarde de nuage de données pour éviter la perte de données.

5. Facile à utiliser, support multilingue.

Le programmeur de restauration A108 BOX vous permet de lire et d'écrire des informations sur la batterie de l'iphone, l'id de visage et d'autres données. La carte de détection de la batterie et la carte de détection du projecteur dot sont compatibles avec notre programmeur de réparation de téléphone.

Remarque: programmeur A108 pour iPhone X-12 Pro Max Face ID reapir sans souder les câbles flexibles, il suffit de remplacer directement le câble flexible matriciel.

Caractéristiques:

1. Les données de batterie de soutien lisent et écrivent, et la correction d'identification de visage.

2. La fonction de l'appareil peut être étendue via le firmware gratuit en ligne.

3. Réparer les données sous-jacentes, les informations sur les accessoires ne seront pas déformées.

4. Sauvegarde de nuage de données pour éviter la perte de données.

5. Facile à utiliser, support multilingue.

ATTENTION: STATUS 100% - REQUIRES FLASHING

Kit de plaque de support interne complet iPhone 12

Écouteur Maille Anti-poussière Avec Support Pour iPhone

Avantages
LTPS
TFT
OLED


Pixel resolution
FHD1080p Comme l`original
HD 720p
Comme l`original


Consommation d`énergie
Économie d`énergie de 10 % par rapport à la qualité TFT
Consommation d`énergie normale
Économie d`énergie de 20 % par rapport à la qualité TFT.


Temps de réponse
Réponse rapide
Réponse normale
Réponse comme l`original


Qualité d`image
Haute qualité d`image avec des couleurs vives.
Affichage normal
Couleurs plus vives, noirs parfaits.


Coût
Excellente qualité et coût.
Meilleur coût
Coût de production en baisse constante.


Commentaires après-vente
Taux de SAV 0.1 %
Taux de SAV 0.3 %
Taux de SAV 0.2 %


Épaisseur du téléphone avec écran (7.65 mm d`origine)
7.75 mm
7.80 mm
7.65 mm

Avantages
LTPS
TFT
OLED


Pixel resolution
FHD1080p Comme l`original
HD 720p
Comme l`original


Consommation d`énergie
Économie d`énergie de 10 % par rapport à la qualité TFT
Consommation d`énergie normale
Économie d`énergie de 20 % par rapport à la qualité TFT.


Temps de réponse
Réponse rapide
Réponse normale
Réponse comme l`original


Qualité d`image
Haute qualité d`image avec des couleurs vives.
Affichage normal
Couleurs plus vives, noirs parfaits.


Coût
Excellente qualité et coût.
Meilleur coût
Coût de production en baisse constante.


Commentaires après-vente
Taux de SAV 0.1 %
Taux de SAV 0.3 %
Taux de SAV 0.2 %


Épaisseur du téléphone avec écran (7.65 mm d`origine)
7.75 mm
7.80 mm
7.65 mm

Use Repair Assistant to Finish an iPhone or iPad Repair

This Battery Without Logo

On an iPhone 12 or later running iOS 18, when a new Apple battery is installed, “Finish Repair” will appear next to Battery until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple battery on another iPhone of the same model.
The date of first use, capacity, and cycle count of your battery can be found in Settings > Battery > Battery Health.


How to Run Diagnostics & Finish Repair for iPhone Battery
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your battery will display 100% health, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the battery may not function optimally, and some features (Face ID, Touch ID) may be disabled until calibration is finalized

The CNC motherboard is intended for professionals with maintenance skills. Each motherboard is tested and polished. Once the soldering or repair is completed, no after-sales service will be provided. If you do not agree with these conditions, please do not place an order. Additionally, if you do not have soldering skills, we recommend that you do not order this product.
Note: This motherboard is reserved for professional repair technicians. If this does not apply to you, please do not purchase it.

The CNC motherboard is intended for professionals with maintenance skills. Each motherboard is tested and polished. Once the soldering or repair is completed, no after-sales service will be provided. If you do not agree with these conditions, please do not place an order. Additionally, if you do not have soldering skills, we recommend that you do not order this product.
Note: This motherboard is reserved for professional repair technicians. If this does not apply to you, please do not purchase it.

Use Repair Assistant to Finish an iPhone or iPad Repair

On an iPhone 12 or later running iOS 18, when a new Apple screen is installed, “Finish Repair” will appear next to Screen until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple screen on another iPhone of the same model.
The date of first use and the condition of the screen can be found in Settings > General > About > Parts & Service History.


How to Run Diagnostics & Finish Repair for iPhone Screen
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your screen will be fully functional, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the screen may not function optimally, and some features (True Tone, Face ID) may be disabled until calibration is finalized

Use Repair Assistant to Finish an iPhone or iPad Repair

On an iPhone 12 or later running iOS 18, when a new Apple screen is installed, “Finish Repair” will appear next to Screen until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple screen on another iPhone of the same model.
The date of first use and the condition of the screen can be found in Settings > General > About > Parts & Service History.


How to Run Diagnostics & Finish Repair for iPhone Screen
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your screen will be fully functional, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the screen may not function optimally, and some features (True Tone, Face ID) may be disabled until calibration is finalized

Use Repair Assistant to Finish an iPhone or iPad Repair

On an iPhone 12 or later running iOS 18, when a new Apple screen is installed,“Finish Repair” will appear next to Screen until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple screen on another iPhone of the same model.
The date of first use and the condition of the screen can be found in Settings > General > About > Parts & Service History.


How to Run Diagnostics & Finish Repair for iPhone Screen
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your screen will be fully functional, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the screen may not function optimally, and some features (True Tone, Face ID) may be disabled until calibration is finalized

Use Repair Assistant to Finish an iPhone or iPad Repair

This Battery Without Logo

On an iPhone 12 or later running iOS 18, when a new Apple battery is installed, “Finish Repair” will appear next to Battery until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple battery on another iPhone of the same model.
The date of first use, capacity, and cycle count of your battery can be found in Settings > Battery > Battery Health.


How to Run Diagnostics & Finish Repair for iPhone Battery
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your battery will display 100% health, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the battery may not function optimally, and some features (Face ID, Touch ID) may be disabled until calibration is finalized

Use Repair Assistant to Finish an iPhone or iPad Repair

This Battery Without Logo

On an iPhone 12 or later running iOS 18, when a new Apple battery is installed,“Finish Repair” will appear next to Battery until you complete the repair using the Repair Assistant.







On an iPhone 12 or later running iOS 18, it is possible to reuse an original Apple battery on another iPhone of the same model.
The date of first use, capacity, and cycle count of your battery can be found in Settings > Battery > Battery Health.


How to Run Diagnostics & Finish Repair for iPhone Battery
1. Ensure your device is updated to iOS 18
2. Go to Settings > General > About > Parts & Service History
3. Tap "Restart & Finish Repair" to activate the Repair Assistant
4. Follow the on-screen instructions to complete the calibration
After completing this process, your battery will display 100% health, and there will be no pop-up warning about non-genuine parts.



Important Notes:

Your iPhone must be connected to Wi-Fi
Your battery level should be above 20%
If the process fails, restart your device and try again
If the repair is not completed, the battery may not function optimally, and some features (Face ID, Touch ID) may be disabled until calibration is finalized